          
|
 |
|
|
|
Sensors for the installation
on the engine for the transfer of oil- i.e. coolant- temperature to the relevant
instrument.
The Oil Temperature Sensor can be installed at various locations at the
engine. Manufacturers or authorised service locations can provide information for the
relevant model of motorcycle.
Typically the Oil Temperature Sensor is just installed in place of the Oil Drain Plug.
Following is a list for the most common motorbikes: List of Oil Drain Plugs
To measure the coolant temperature, the Coolant Temperature Sensor has to be placed in the Cooling System. Please contact an approved
service location or the manufacturer for the best suited location.Temperature Sensors are available in the following
thread sizes:
|
|
|
TEMPERATURE SENSORS
for Oil- or Coolant Temperature Gauge (+120°C = 36,5 Ohms) |
Model-No: |
|
|
 |
M 10 x 1 |
G01 |
|
|
M 10 x 1,5 |
G02 |
|
|
M 12 x 1,5 |
G03 |
|
|
1/8-27 NPTF |
G10 |
|
|
 |
M 12 x 1,25 |
G04 |
|
M 14 x 1,5 |
G05 |
|
|
M 16 x 1,5 |
G06 |
|
|
M 18 x 1,5 |
G07 |
|
|
|
|
|
The Oil pressure can be measured at various locations at the
engine. Manufacturers or authorised service locations can provide information for the
relevant model of motorcycle.
Pressure Sensors are available in the following
thread sizes:
|
|
|
PRESSURE SENSORS
for oil pressure (0-10 bar) |
Model-No: |
|
|
 |
|
|
|
|
|
|
|
|
M 14 x 1,5 |
G43 |
|
|
|
|
|
|
other tread sizes |
on request |
|
|
|
|
|
|
|
|
 |
Set Valkyrie / F6C |
G61 |
|
|
Includes Sensor G43
Adapter G23
Sealings and Wiring |
|
|
|
On request pressure sensors are also available with additional switch
|
|
|
THREAD ADAPTERS |
|
|
|
 |
Thread Adapter, Brass
M 14 x 1,25 > M 10 x 1 |
G21 |
|
|
Thread Adapter, Brass
M 20 x 1 > M 14 x 1,5 |
G25 |
|
|
|
|
|
 |
L-Thread adapter, Aluminium
M 20 x 1 > M 14 x 1,5
with sealings |
G23 |
|
|
|
|
|
WATER HOSE ADAPTERS |
|
|
|
 |
Water hose adapter, Aluminium
ø28mm / 1 1/10"
for Temp.-Sensor G10 |
G31 |
|
|
